|
So I took whats left of the original gun out to run some rounds through this weekend. Put probably 1000 rounds through in one day (alot when mags are 32, and you have to use the bloody loader..).
Verdict on the edgi 6.01 363mm TBB is 100% thumbs up. I personally have never shot an airsoft M4 with that sort of accuracy, consistancy, and range. That being said, for 90$, there may be better "bang for your buck" barrels coming up (I know Cansoft is looking into making some). Will give some proper accuracy:distance specs when I get access to the warehouse next.
The TAF buffer tube extension was simple, and did what it had to do. My WA fixed stock needed some modification to fit on, but was worth it. That being said, my lower reciever is cracked at the plastic on top of the buffer tube..some epoxy is holding up ,but a metal lower would be much needed...
The O-Ring piston head is a definite necessity. When going to replace the original, (only around 500 shots through) the plastic seal was shaved down on the top. For 30$, and 10 minutes work, seems like a no-brainer.
Still working on the velocity reducer. Will update.
After about 700 rounds, the trigger became solid and wouldnt pull. Popped the rear pin, and for some reason the trigger assembly was stuck, but when you went to safe, it reset. After going through a few times, it worked as normal, and shot for another 300~ rounds with no more issue.
Overall, after the upgrades, i'm massivley impressed for what I thought was never going to be a fieldable gun. I'm waiting for 9 more mags, and I think i'm going to try to field it for the mid temp games this summer.
..Now if only my KJW MEU wasnt such a piece of shit...
|