Airsoft Canada - View Single Post - LiPo Ready

lurkingknight · September 20th, 2011, 11:29

is mah still a determining factor of how many rounds can be fired from a lipo as it is a nimh?

I'm putting a shopping list together and will probably convert my 2 AEGs to lipo next year, and that seems to be the only question that I haven't been able to find an answer to.

I'm probably only going to stick with 7.4V maybe a 30C though I'd have to do some digging to find out what the draw is on the motors I have, maybe I could run a 20C. Since I'm told the 7.4vs behave closer to 9.6v nimh batteries. I'm looking to maintain my RoF, I just want lighter/smaller battery packages.

mosfet and pcbs are on the shopping list plus rewiring to deans, possibly upgrade wiring, not sure what's on the guns now. And a good charger. Gearbox upgrades will be dependent on what I find inside when it comes time to look.

September 20th, 2011, 11:29	#45
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	is mah still a determining factor of how many rounds can be fired from a lipo as it is a nimh? I'm putting a shopping list together and will probably convert my 2 AEGs to lipo next year, and that seems to be the only question that I haven't been able to find an answer to. I'm probably only going to stick with 7.4V maybe a 30C though I'd have to do some digging to find out what the draw is on the motors I have, maybe I could run a 20C. Since I'm told the 7.4vs behave closer to 9.6v nimh batteries. I'm looking to maintain my RoF, I just want lighter/smaller battery packages. mosfet and pcbs are on the shopping list plus rewiring to deans, possibly upgrade wiring, not sure what's on the guns now. And a good charger. Gearbox upgrades will be dependent on what I find inside when it comes time to look. Last edited by lurkingknight; September 20th, 2011 at 11:35..