Airsoft Canada - View Single Post

m102404 · July 11th, 2012, 15:49

All the cylinders up to M110 are the same (aside from colour). M130+ and they're different

Between them, there's an additional port cut into the cylinder to allow the piston to get up to speed before the compression starts.

That said...I've thrown all sorts of springs into the same cylinder body. All it's changed is the FPS, the shot cycle/etc didn't get messed up. That said some spring/cylinder combos might be less than optimal.

***should note that these comments all have to do with 2007/2008 PTW stuff

July 11th, 2012, 15:49	#186
m102404 Tys Trader rating Join Date: Apr 2006 Location: Toronto	All the cylinders up to M110 are the same (aside from colour). M130+ and they're different Between them, there's an additional port cut into the cylinder to allow the piston to get up to speed before the compression starts. That said...I've thrown all sorts of springs into the same cylinder body. All it's changed is the FPS, the shot cycle/etc didn't get messed up. That said some spring/cylinder combos might be less than optimal. **should note that these comments all have to do with 2007/2008 PTW stuff Last edited by m102404; July 11th, 2012 at 15:55..*