![]() |
|
|
||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
![]() |
|
Thread Tools |
![]() |
#16 | |
man kev, i used to like you.... now i'm just jealous
![]()
__________________
Quote:
|
||
![]() |
![]() |
![]() |
#17 |
That is correct!
__________________
Kevorkian ![]() I SUPPORT THE USE OF SILICA BB BASTARDS! |
|
![]() |
![]() |
![]() |
#18 |
* AV revoked *
|
hmm ! just got back home after an busy weekend and just almost ready to take some picture of internal for everyone but damn it, KEVORKIAN, you already beat me
![]()
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#19 |
Heeere, Brucey, Brucey, Brucey
|
That's what you get for teasing us
__________________
Special Operational Gear: 1 quart of kerosene in a squeeze bottle, 3 washers and waterproof matches. D.O.W. Mason Montreal Age Verifier |
![]() |
![]() |
![]() |
#20 |
* AV revoked *
|
hmm ! I have a new toy next month for teasing you again. just only you.
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#21 |
So question for you guys then, would it be possible to move these internals into a standard TM 5.1? from what I can see between the two 4.3's, the frames are pretty much identical.
__________________
G36c/k/e - MG36 |
|
![]() |
![]() |
![]() |
#22 |
GBB Whisperer
|
I inspected an Xtreme as well and the only real mechanical difference I saw was the modified blowback unit.
In fact, Daiviet had already modified a blowback unit to do the exact same thing as the Xtreme when it was first announced. |
![]() |
![]() |
![]() |
#23 |
Captain Sunshine
|
yea, instructions for mod is here http://www.airsoftcanada.com/showthr...t=72089&page=3
However, I'd only recommend this only if you have a spare blowback chamber, just in case you want to go back to semi auto. In addition, the spring buffer is required in order to make it work, or else the hammer will get caught under the blowback chamber when the slide is all the way back. Looking at the new blowback chamber though, looks like one side doesnt need to be filled in all the way... |
![]() |
![]() |
![]() |
#24 |
So did you work out all the issues with yours Daviet? Some finished photos would be awesome if you could manage.
__________________
G36c/k/e - MG36 |
|
![]() |
![]() |
![]() |
#25 |
just wanna share my Xtreme Hi capa, outfitted with a PGC slide, Tanio koba one touch joint, multi hole compensator, and hop twist inner barrel
![]() BTW, the hop up chamber+inner barrel has a small plastic spacer in front ![]() compared to stock 5.1 ![]() anyone here know what it is for? |
|
![]() |
![]() |
![]() |
#26 |
GBB Whisperer
|
Are you also using the TK outer barrel to attach the TK One Touch Joint?
I'd imagine that spacer is there to prevent the outer barrel from pulling all the way back. |
![]() |
![]() |
![]() |
#27 |
I removed the short stroke system (extra spring in recoil rod and the screw in slide stop) in my unit. Still using stock outer barrel. Spacer came with stock unit. Will this spacer system prevent damage to the lugs of my slide when using a steel outer barrel? I've read that i can destroy my slide with the wrong combination of outer barrel+slide
Last edited by bunta510; April 3rd, 2009 at 03:36.. |
|
![]() |
![]() |
![]() |
#28 |
GBB Whisperer
|
The PGC slide should be able to handle a metal barrel fine
|
![]() |
![]() |
![]() |
#29 | |
Quote:
hicapa with spacer in inner barrel ![]() ![]() stock hicapa ![]() ![]() of course without the tilting action, i noticed there are more scratches on my chamber |
||
![]() |
![]() |
![]() |
#30 |
GBB Whisperer
|
You can not use the spacer with an outer barrel that is not designed to not tilt.
Barrels designed for this have a lowered chamber to prevent contact with the slide. Otherwise, you can damage the slide and/or the chamber. |
![]() |
![]() |
![]() ![]() |
|
Bookmarks |
Thread Tools | |
|
|
![]() |