Uber realistic Glock 19

ILL9MIL · July 1st, 2006, 20:30

KSC Glock 19
G&G metal slide
KSC metal outer barrel
Tanio Koba twist barrel
Custom recoil spring (G&P G17 spring on metal 19 guide)
Custom stock ported gas release valve
Custom leak-proof fill valve
PE mag catch
HopUp ball removed for ulitmate power and accuracy
HIdakaya 150% hammer spring
HIdakaya floating valve spring
SD Floating valve
Custom blowback chamber springs
Proud Glock baseplate
Proud luminous front sight
G23F rear sight
The Arms Room "CQB Standoff"
CUSTOM GLOCK LOGO ON FRAME
CUSTOM LOCKING PIN

BC_K · July 1st, 2006, 20:33

WTF is on the front of that gun? Looks sorta like a strike face thing.

ILL9MIL · July 1st, 2006, 20:42

That is the "CQB STANDOFF" made by The Arms Room. I bought it here

http://www.brownells.com/aspx/NS/sto...OFF+for+GLOCK~

Point_Man · July 1st, 2006, 20:43

I believe it allows for contact firing when the muzzle is pushed against someones skin. Not that it's necessary for airsoft purposes...but still a neat idea.

ILL9MIL · July 1st, 2006, 20:46

Exactly guys, it keeps the slide from being pushed out of battery when pressed against something

Ghost Snake · July 1st, 2006, 20:54

I'll leave all the glock bashing out of this, but its hard

You say the logo is custom, may I ask how you did it?

active1x0 · July 1st, 2006, 20:55

That is an AWESOME picture, not to mention a great looking Glock. Props to you.

I wanted to ask about the removal of the hop-up ball. Did you just take it out completely and put the hop-up sleeve on without it? Also, did you cut off the tiny hop-up nub?

hattrick · July 1st, 2006, 20:57

Not so much press against skin as, people know how to knock a gun into battery. (aperently easiest on the baretta model)

*edit
Those front end kits are so00o0o0 nice.
I'm suprised they arnt more common.
(this being the first time i've ever seen one for the glock)

Mr Jon · July 1st, 2006, 20:58

Wow! How did you manage to get the lock pin and logo in that frame, I must know.

the end · July 1st, 2006, 21:23

it looks like he melted it in with some sort of stamp....but that just what i think

but the gun looks good

ILL9MIL · July 1st, 2006, 22:13

I used the locking pins from a KWA 18C. The KSC/KWA 18C uses two fake pins on both sides to replicate the look of the real Glock's pin. The KSC/KWA pins dont actually go thru the frame. I took the pins out of my old dead KWA 18C and drilled holes in my 19 and put them in.

For the logo I bought Proud enhanced pistol grips for the Marui 18C electric Glock and I cut the Glock logo out of the grip. I dremeled out the area on my 19 for the logo to sit in then I superglued the logo in place.

Rayzn · July 1st, 2006, 22:33

How much did the gun cost without the customization?

active1x0 · July 1st, 2006, 22:35

Quote:

Originally Posted by Rayzn

How much did the gun cost without the customization?

http://www.uncompany.com/pageproduct...asp?prodid=653

http://www.uncompany.com/pageproduct...asp?prodid=654

ILL9MIL · July 1st, 2006, 23:01

Quote:

Originally Posted by Rayzn

How much did the gun cost without the customization?

gun + all upgraded parts was about $450+ USD

Trader rating · July 2nd, 2006, 03:22

dam ive been looking for a KSC glock with all the trades..how heavy is the gun? and great work

EDIT:
and btw can you by any chance take a picture of the logo on the frame so we can have closer look at your custom trade. :grin:

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 1st, 2006, 20:30	#1
ILL9MIL Trader rating Join Date: Jul 2005 Location: VA	Uber realistic Glock 19 KSC Glock 19 G&G metal slide KSC metal outer barrel Tanio Koba twist barrel Custom recoil spring (G&P G17 spring on metal 19 guide) Custom stock ported gas release valve Custom leak-proof fill valve PE mag catch HopUp ball removed for ulitmate power and accuracy HIdakaya 150% hammer spring HIdakaya floating valve spring SD Floating valve Custom blowback chamber springs Proud Glock baseplate Proud luminous front sight G23F rear sight The Arms Room "CQB Standoff" CUSTOM GLOCK LOGO ON FRAME CUSTOM LOCKING PIN

July 1st, 2006, 20:54	#6
Ghost Snake Trader rating Join Date: Apr 2005 Location: Edmonton	I'll leave all the glock bashing out of this, but its hard You say the logo is custom, may I ask how you did it? __________________

July 1st, 2006, 20:58	#9
Mr Jon Trailer Park Supervisor Trader rating Join Date: Jul 2003 Location: Winnipeg MB	Wow! How did you manage to get the lock pin and logo in that frame, I must know. __________________

July 1st, 2006, 20:33	#2
BC_K Banned Trader rating Join Date: Mar 2004	WTF is on the front of that gun? Looks sorta like a strike face thing.

July 1st, 2006, 20:42	#3
ILL9MIL Trader rating Join Date: Jul 2005 Location: VA	That is the "CQB STANDOFF" made by The Arms Room. I bought it here http://www.brownells.com/aspx/NS/sto...OFF+for+GLOCK~

July 1st, 2006, 20:43	#4
Point_Man Trader rating Join Date: Dec 2001 Location: Ottawa, Ontario	I believe it allows for contact firing when the muzzle is pushed against someones skin. Not that it's necessary for airsoft purposes...but still a neat idea.

July 1st, 2006, 20:46	#5
ILL9MIL Trader rating Join Date: Jul 2005 Location: VA	Exactly guys, it keeps the slide from being pushed out of battery when pressed against something

July 1st, 2006, 22:13	#11
ILL9MIL Trader rating Join Date: Jul 2005 Location: VA	I used the locking pins from a KWA 18C. The KSC/KWA 18C uses two fake pins on both sides to replicate the look of the real Glock's pin. The KSC/KWA pins dont actually go thru the frame. I took the pins out of my old dead KWA 18C and drilled holes in my 19 and put them in. For the logo I bought Proud enhanced pistol grips for the Marui 18C electric Glock and I cut the Glock logo out of the grip. I dremeled out the area on my 19 for the logo to sit in then I superglued the logo in place.

July 1st, 2006, 22:33	#12
Rayzn Trader rating Join Date: Jul 2006 Location: Boston, Ma	How much did the gun cost without the customization?

July 2nd, 2006, 03:22	#15
14K Guest Trader rating	dam ive been looking for a KSC glock with all the trades..how heavy is the gun? and great work EDIT: and btw can you by any chance take a picture of the logo on the frame so we can have closer look at your custom trade. :grin:

Uber realistic Glock 19

Showcase